Install BMW INPA on WinXP Win7 Win8 Win10įree Download BMW E-sys Plus 3.8.1 with Keygenįree ECM Titanium 1.
And both work and are not afraid of the Internet.įree Download TOYOTA Techstream V18.00.008 Here are the tips to modify the Openport 2.0 HQ clone with black board to avoid damage when connecting with the network.Ħ resistors were soldered in each ( check table of replacements ) to bring them into line with the original, one additional resistor and two electrolytic capacitors were soldered to the LM voltage regulator (aka LD-shka, aka AMS1117). Supports these major OBD protocols:CAN 2.0 (CAN/ISO15765) and K-line (ISO9141/ISO14230(KWP2000)/dual K line). The OEM software we have test on TOYOTA ,LAND ROVER and JAGUAR are all excellent. We are not holding the responsibility for your damage. Tactrix Openport 2.0+ can work for Toyota, Jaguar and LandRover diagnostics. How to Modify Tactrix Openport 2.0 Clone to Enable Network Connection?ĭisclaimer: the modification guide was made by a Russian technician from drive2. The HQ openport 2.0 clone does not allow network connection without modification.
Today we share another guide for correct resistors in order to make it work with the network connection.
Able to log from Innovate Motorsports 2.In the previous post, we discussed how to choose a high-quality Tactrix Openport 2.0 Clone. Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector. Standalone datalogs to microSD / microSDHC card without a laptop. J2534 PassThru support with Windows DLL. USB 2.0 full speed device (USB-A/Mini cable included). Choose the adapter you need from the 'Reflash Adapters' drop down list on the right side of this page. For Mitsubishi, you'll need the adapter for most pre CAN vehicles which include the 5-9 Evo. No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models. For Subaru you'll only need a reflash adapter for the 2001 through 2005 WRX, but not STi, unless you're working on an early non USDM STi in which case you made need one of our WRX adapters. We include a USB cable with each OpenPort, which is all the hardware you'll need unless you have one of the few vehicles that require a separate reflash adapter. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress. The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface.
0 kommentar(er)
